Had a six inch lift installed which required a four inch block and add a leaf in the rear.a 4 inch control arm drop in the front coupled with the torsion bars being turned up an additional 2 inches. They did not turn my torsion bars so j got a six inch lift in the rear and a four in the front which threw my camber way out of spec to the point it would not properly aligned the installed can pin washer on upper control arm upside down. Busted both of my less than one year old inner tie rod ends. And ruined my six month old sway bar link. Also did not hang my tail pipes back to the truck after cutting them loose causing them to bang on my leaf spring. Terrible work will never go back. After making them repair these issues the hit my tie rods nut withan iimpact so much the threads were completely gone lucky my steering linkage didn't fa out